|
Ph.D.
|
|
Name
|
Title
|
|
Hwang,
Guan-Shyong
|
Synthesis and Analysis of Camoid Mechanisms.
|
|
Lin, Bor-Jeng
|
Synthesis
and Analysis of Roller Gear Cam Mechanisms.
|
|
Ho,
Hui-Chun
|
Improvement
of Indexing Accuracy for Globoidal Cam Indexing Mechanisms.
|
|
M.S.
|
|
Name
|
Title
|
|
Lin, Shi-Wei
|
Synthesis and Analysis of
Dwell-Rise-Return-Dwell Cam-Follower Motion Curve.
|
|
Hwang,
Guan-Shyong
|
The Profile
Determination of the Camoid using the Theory of Envelope.
|
|
Chen, Chao-Ming
|
Curved Surface Design using Parametric
B-Splines.
|
|
Lin, Bor-Jeng
|
Geometric Design and Kinematic
Analysis of Roller Gear Cams.
|
|
Wei, Xian-Min
|
A
Unified Approach to the Determination of Planar and Spatial Cam Profiles.
|
|
Shyu,
Kuen-Long
|
A New
Method for the Construction of Blend Surfaces.
|
|
Liu,
Yeu-Tay
|
Surface
Generation of Impellers of Centrifugal Compressors.
|
|
Juang,
Chil-Huei
|
The
Construction of Corner Surfaces.
|
|
Yan, Wei-Feng
|
Generation
of Tool Paths for Five-Axis Machining without Interference.
|
|
Ho, Ming-Zheng
|
A Study on Ruled
Surfaces for Five-Axis Machining.
|
|
Huang, Nan-Rong
|
The Geometric of
Globoidal Cam Reducers.
|
|
Huang, Meng-Heng
|
Application of Reverse
Engineering to Planar Cam-Follower Motions.
|
|
Tsay,
Feng-Nien
|
A Study on Indexing
Accuracy of Roller Gear Cams at High Speeds.
|
|
Lin,
Jay-Hwain
|
Synthesis and Analysis
of Parallel Index Cam Mechanisms.
|
|
Ho,
Hui-Chun
|
A Study on the Dynamic
Behavior and Preload of the roller Gear Cams.
|
|
Chen,
Huo-Chu
|
A Study of Multi-Axis
Machining of Centrifugal Compressor Impellers.
|
|
Tsay,
Jinn-Chin
|
A Study on Shoe Lasts
Surface Construction.
|
|
Sun,
Tso-Yu
|
Synthesis and Analysis
of Multi-Action Forging Die Sets Using Cam Mechanisms.
|
|
Chen, Tai-Ren
|
Design of Globoidal Cam Pick
and Place Devices.
|
|
Wang,
Kuan-Chang
|
The Measurement of
Positioning Accuracy for Roller Gear Cam Mechanisms.
|
|
Tsay,
Pa-Yee
|
Design of Rotary Tables using
Roller Gear Cam Mechanisms.
|
|
Chen,
Jiun-Ren
|
A Study on Machining of
Impellers with Ruled Surfaces.
|
|
Tseng,
Kuo-Shu
|
Development and
Application of a Planar Cam Measuring System.
|
|
Liu,
Chung-Han
|
Observation on Dynamic
Characteristics of Roller Gear Cam
due to Various Torque Compensations.
|
|
Ho, Sheng-Ying
|
A Study of the Torque
Compensating Phase on the Positioning Accuracy of Indexing Tables.
|
|
Chiao,
Chih-Chung
|
A Study of High-Speed
Machining on Thin-Walled Components.
|
|
Chen,
Chien-Wen
|
A Study on the
Improvement of Machining Efficiency of Impellers.
|
|
Sung,
Yi-Fang
|
The Effect of the Cutter
Attitude on the Surface Roughness.
|
|
Huang,
Jyh-ming
|
Geometric Analysis of
Double-Enveloping Reducer.
|
|
Su,
Teng-Fa
|
Geometric Measurements
for Double-Enveloping Worms
|
|
Kuo,
Hsin-Hung
|
The Effect of the
Improving Tool Paths for Impellers
|
|
Hsuey,
Chun-Yu
|
Analysis of a Linkage
Type Punching Mechanism and Improvement of Punch Holes Quality for FPCB
|
|
Tsay,
Meng-Che
|
Design and Manufacture of
a Cam Type Linear Actuator
|
|
Lin,
Cheng-Feng
|
Improvement of Residual
Vibrations for Intermittent Positioning
|
|
Lin,
Sheng-Yang
|
Generation of Globoidal
Cam Surfaces with Conical Rollers
|
|
Shr,
Wei-Jr
|
Synthesis of Motor
Motions for Intermittent Indexing Tables with Minimized Positioning Time
|
|
Chen, Po-Tzu
|
Application of A Voice Coil Actuator
for Punching Flexible Printed Circuit Boards
|
|
Huang,
Shao-Yen
|
Forming Ceramic Turbine Rotor by Green
Machining
|
|
Lin, Feng-Tien
|
Constant Speed
Mechanism of Planetary Gear Train
|
|
Lai, Dong-Yi
|
Design of
Magnetic Flux for a High Speed Generator
|
|
Shyu, Shian-Wun
|
Analysis
and Motion Curve Synthesis of Cam-Gear Intermittent Mechanisms
|
