YEAR |
NAME |
THESIS |
1995 |
普翰屏 H.P. Pu |
8090鋁鋰合金低溫與高溫超塑板材之製程開發與形變機構分析 Material development and deformation mechanism analyses on the low- and high-temperature superplasticity in 8090 Al-Li thin sheets |
1997 |
陳宗榮 C.R. Chen |
鋁鋰合金板材超塑成形因子與晶界滑移機構之分析 Analyses of superplastic forming variables and grain boundary sliding mechanisms of the aluminum lithium sheets |
| 廖忠賢 C.S. Liauo |
溫度與應變速率對AC8A/Al2O3短纖複材機械性質之影響及變形機制之探討 Mechanical properties and deformation mechanism of short-fiber AC8A/Al2O3 composites through temperature and strain rate control |
|
1998 |
陳盛祺 S.C. Chen |
鋁鋰合金電子束與雷射束銲道之微組織與機性分析 Micro structure and mechanical properties of Al-Li alloy via e-beam and laser welding treatment |
| 伏和中 H.C. Fu |
Ti3A1基介金屬合金超塑性薄板之顯微組織變化與變形機構分析 Analysis of microstructure evolution and deformation mechanism of Ti3A1 intermetallic superplastic thinplate |
|
1999 |
樓百堯 B.Y. Lou |
高溫高速超塑性鋁合金與鋁基複材之製程與變形特徵研究 Processing routes and deformation characteristics of high temperature and high strain rate superplasticity in aluminum alloys and composites |
2000 |
王宗鼎 T.D. Wang |
細晶6061鋁基材料高速超塑性之研發與分析 Development and analysis of fine-grained 6061 Al based materials on high strain rate superplasticity |
2001 |
蕭一清 I.C. Hsiao |
5083鋁合金低溫超塑性研發與變形機構分析 Development of low temperature superplasticity and analyses of deformation mechanisms in 5083 Al alloys |
2003 |
楊凱琳 K.L. Yang |
Ti3Al基合金之低溫超塑性與應變誘發相變化研究 Low temperature superplasticity and strain induced phase transformation in Ti3Al based alloy |
2004 |
謝佩汝 P.J. Hsieh |
鋯基合金於累積滾壓製程中之奈米細晶化與非晶質化研究 Nanocrystallization and amorphization of Zr base alloys during accumulative roll bondin |
| 黃建超 C.C. Huang |
AZ31 鎂合金之管材擠型與液壓鼓脹成形研發 Tube extrusion and hydroforming of AZ31 Mg alloys |
|
| 2005 | 郭木城 M.C. Kuo |
高性能鎂/碳纖/聚二醚酮夾層及奈米粉體強化聚二醚酮複材之製備與特性分析 Fabrication and characterization on high performance Mg/Carbon-Fiber/PEEK laminates and Nanoparticle/PEEK nanocomposites |
| 林鉉凱 H.K. Lin |
經高比率擠型AZ31鎂合金之低溫高速超塑性研發與變形機構之分析 Development and analysis of low temperature and high strain rate superplasticity in high-ratio extruded AZ31 Mg alloys |
|
| 林義凱 I.K. Lin |
管材液壓鼓脹成形之成形性分析 Formability analysis of tube hydraulic bulge forming |
|
2006 |
洪英博 Y.P. Hung |
奈米粉體強化鎂基複合材料之微觀組織與機械性質強化機構 Microstructures and mechanical strengthening mechanisms of nanoparticle reinforced Mg based composites |
| 李敬仁 C.J. Lee |
摩擦攪拌製程製作細晶粒鎂基合金與複材之研發與性能分析 Development and analysis of fine-grained Mg base alloys and composites fabricated by friction stir processing |
|
2007 |
張志溢 C.I. Chang |
以摩擦旋轉攪拌製程製作奈米細晶鎂基合金與複材之研發 Achieving ultrafine nano grains in AZ31 Mg based alloys and composites by friction stir processing |
王中鼎 C.T. Wang |
金屬薄膜於奈米壓痕之數值模擬與實驗研究 Numerical simulation and experimental test of nanoindentation analysis on metal thin film |
|
2008 |
洪子翔 T.H. Hung |
改善三元鎂基非晶質合金之熱性質與機械性質之研究 Study of thermal and mechanical properties in Mg-Cu-Gd amorphous alloys |
| 張育誠 Y.C. Chang |
多元鎂基非晶質金屬玻璃熱機性質與熱可塑功能性之研究 Study on the thermomechanical properties and workability of Mg-based bulk metallic glasses |
|
2009 |
羅友杰 Y. C. Lo |
多種二元金屬玻璃之結構相變與週期變形機制之原子模擬研究 Atomic Simulations on Phase Transformation and Cyclic Deformation Mechanisms in Various Binary Metallic Glasses. |
陳海明 H.M.Chen |
塊狀金屬玻璃與複材之塑性分析及剪待變形機構 Analysis of Plasticity and Shear Band Deformation Machanism in Bulk Metallic Glasses and Composites. |
|
賴炎暉 Y.H. Lai |
以微米壓縮量測不同金屬玻璃微米柱之尺寸效應 Effects of Sample Size on Various Metallic Glass Micropillars in Microcompression. |
|
2011 |
周鴻昇 Stephen H. S. Chou |
鋯基金屬玻璃薄膜複材與微米柱之強化韌化與微奈米機械性質分析 Strengthening and Toughening of Zr-Based Thin Film Metallic Glasses and Composites under Nanoindentation and Micropillar Compression |
| 劉名哲 Ian M. C. Liu |
非晶與奈米晶多層膜結構在壓縮測試下之機械性質與變形行為 Mechanical Properties and Deformation Behaviors in Amorphous/Nanocrystalline Multilayers under Microcompression |
|
2012 |
裴浩然 Henry H. J. Pei |
非晶鋯銅金屬玻璃與奈米晶銅多層薄膜之拉伸性質 Tensile Response of Amorphous/Nanocrystalline ZrCu/Cu Multilayered Thin Films |
宋大豪 Welson T. H. Sung |
低維度應力對寬能隙單晶半導體的機性和光電特性影響 |
|
2013 |
郭哲男 C. N. Kuo |
CuZrAl-V/Co 金屬玻璃複合材料之微組織與機性分析 Microstructural and mechanical response of CuZrAl-V/Co bulk metallic glass composites |
官聖堯 Samuel S.Y.Kuan |
薄膜金屬玻璃與複材之機性行為與剪帶變形機制 Mechanisms in Thin Flim Metallic Glasses and Composites |
|
2014 |
黃朝先 Andy |
結晶或非晶之鋯基與鈦基金屬玻璃在模擬體液下電化學與生物相容性質分析 Electrochemical and biocompatibility response of amorphous or partially crystallized Zr/Ti-based metallic glasses in simulated body fluid |
2015 |
陳盈翰 Rex |
鋯銅基金屬玻璃之潛變鬆弛與界面控制變形行為 Time-dependent and interface-controlled deformation behavior of Zr-Cu metallic glasses |
| 2016 | 謝中瀚 David |
奈米拉伸界面測試分析薄膜之界面強度 Thin film interfacial strength characterization using nano-tension interface testing |
| 2017 | 張嘉驊 Jerry |
金屬玻璃與純金屬多層薄膜中梯度界面之性質分析 Characterization and analysis on graded interface in amorphous/crystalline multilayered thin films |
蔡濰猷 Wayne |
超音波珠擊製程應用於不鏽鋼表面細晶化及純鋁表面高散熱鍍膜之微結構及性質分析 Microstructures and properties of nano-grain refined 304 stainless steel and ceramic-powder inserted Al processed by ultrasonic surface mechanical attrition treatment |
|
張哲銘 Carl |
鋁基金屬玻璃/奈米複材薄膜之光學性質與抗菌效果 Optical Properties and Antimicrobial Effects of Al-Based Thin Film Metallic Glasses/Nanocomposites |
|
| 2018 | 魏廷宇 Tim |
生醫植入用鈦-鉭-鈮合金之配製與特性分析 Fabrication and characterization of Ti-Ta-Nb alloys for bio-implant purposes |
陳勝育 Daco |
以積層製造製備孔洞Ti-6Al-4V合金骨材植入物之結構與機性研究 Microstructure and mechanical properties of porous Ti-6Al-4V alloys for bone implants fabricated by additive manufacturing |
|
莊文碩 Edward |
鎂鋅釔合金中18R長程有序結構之變形機制與尺寸效應 Deformation mechanisms and sample size effects of Mg-Zn-Y 18R LPSO |
|
陳浩鈞 Nick |
奈米尺度之拉伸試驗對氧化鋅單晶的機械性質影響與其尺寸效應 Mechanical behavior and size effect of zinc oxide under nano-scale tension test |
|
蔡旼蒼 Tommy |
高熵合金之表面改質分析與奈米壓痕潛變行為 Surface modification analysis and nanoindentation creep behavior of high entropy alloys |
|
| 2019 | 林岳勳 Andy |
合金元素比與製程對高強度複雜黃銅的顯微組織與耐磨性之影響 Effects of element content ratios and manufacturing processes on microstructure and wear resistance of high strength complex brass |
| 2020 | 林炳宏 |
鈦基輕量化中熵合金常溫與中高溫不同面向之奈米尺度機械性質 Nano-scaled mechanical properties of Ti-based medium entropy alloys along different orientations at room and elevated temperatures |
劉泰佑 Edward |
TiZrNbTa 高熵合金之相分離及其機械性質 Phase separation and mechanical properties of TiZrNbTa high entropy alloys |
|
吳曜丞 Carson |
3D列印積層製造低楊氏模數多孔鈦基材料之開發 Development of low Young's modulus Ti-based porous materials by 3D printing additive manufacturing |
|
| 2021 | 張祥凱 Kevin |
Microstructure and Mechanical Properties of Ti-Based Lightweight Multi-Principal Element Alloys |
李萬鹏 Alvin |
Design of Ultrastrong but Ductile High-Entropy Alloys with Controlled Precipitations and Heterogeneous Grain Structures | |
陳暢 Roy |
The Application of Multi-Scaled Transition Metal Oxides Based Anodes for Lithium-Ion Batteries | |
| 2022 | 甘世豐 Shifeng |
Synthesis Design and Theranostic Applications of Novel Luminescent Materials with Aggregation-induced Emission Characteristics |
陳文宇 Devin |
Corrosion Performance and Underlying Mechanisms of Multi-principal Element Alloys Prepared by Various Advanced Manufacturing Technologies | |
周子修 Randy |
Thermal Stability and Hetero-deformation Induced Strengthening of Multi-principal Element Alloys | |
| 2023 | 陳彥翔 Will |
In-vitro and in-vivo responses of new promising surface modification of Ti6Al4V implants by Ti-Ta-Nb multiple-principal-element coating |
黃婧 Jessica |
Dual heterogeneous structure facilitating excellent strength-ductility synergy in an additively manufactured multi-principal-element alloy |
YEAR |
NAME |
THESIS |
1991 |
普翰屏 H.P. Pu |
航空用鋁合金之超塑性評估 Superplasticity study of aerospace Al-alloy |
| 駱玉盛 Y.S. Lo | 金屬基複合材料動態與半靜態負載之機械性質反應及微組織發展 Mechanical response and micro-structure evolution of metallic composites under dynamic and semi-static loading |
|
| 顏順興 S.H. Yen | 熱機處理與測試條件對鋁鋰及鋁鋅鎂合金超塑性之影響 Influence of thermomechauical treatment and various loading condition to Superplasticity of Al-Li and Al-Zn-Mg alloys |
|
1992 |
陳宗榮 C.R. Chen | 航空用鋁鋰合金超塑成形及成形後機械性質之評估 Superplastic forming and mechanical properties after forming of aerospace Al-Li alloy |
| 韋霖 L. Wei | 熱處理與製程對鋁基複合材料破壞韌性的影響 Influence of thermal treatment and processing condition to fracture toughness of Al based composites |
|
1993 |
廖忠賢 C.S. Liauo | AC8A/Al2 O3 鋁基複材在中溫長時間曝露之微觀分析 Micro-structure analysis of AC8A/Al2 O3 Al-based composites under long-time medium-temperature annealing |
1994 |
樓百堯 B.Y. Lou | 鋁基複合材料在不同測試速率下之破壞分析 Characterization of failure mechanisms of Al-base composites as a function of loading rate |
| 李明峰 M.F. Lee | 超塑性8090鋁鋰合金薄板之雷射銲接 Laser welding of the super plastic 8090 Al-Li alloy thin sheet |
|
| 劉芳昌 F.C. Liu | 8090鋁鋰合金低溫超塑性之顯微觀察 Microstructural characterzation of 8090 Al-Li alloys at low temperture of superplastic |
|
1995 |
彭冠傑 G.J. Pen | 8090超塑性鋁鋰合金淬火敏感性及二次析出相之研究 The quench-sensitivity and second phases of 8090 Al-Li alloy |
1996 |
王宗鼎 T.D. Wang | Ti3Al基超塑薄板之超塑特性分析 Analysis of superplastic characteristics of Ti3Al- based superplastic sheet |
李鴻麟 H.L. Lee (James) | 鋁基複合材料之製程及高溫機性之探討 The study on processing & high temperature mechanical propeities of aluminun materix composite |
|
| 1997 | 黃永發 Y.F. Huang |
6061/Sic(p)鋁基複材高溫超塑性之研究 High-temperature superplasticity of 6061/Sic(p) Al-base composites |
| 黃俊仁 J.R. Huang | 2024/SiC(p)鋁基複合材料高溫超塑性之研究 High-temperature superplasticity of 2024/SiC(p) Al-base composites |
|
1999 |
蘇聖紋 S.W. Su | 超塑性鋁鎂合金之織構演變 Evolution of texture in superplastic Al-Mg alloys |
2000 |
黃儒瑛 R.Y. Huang | 6061/SiC鋁基複合材料之高能量束銲接性質研究 Characterization of high energy beam welding of 6061/SiC aluminum matrix composites |
2001 |
林鉉凱 H.K. Lin | 析出型AZ91鎂合金低溫超塑性之研究 The development and analysis of low temperature superplasticity in AZ91 magnesium alloy |
| 蘇勢方 S.F. Su | 鎂基材料電子束銲接之冶金特性與織構研究 Research of metallurgical properties and texture analyses of the magnesium-based alloys during e-beam welding |
|
2002 |
洪英博 Y.P. Hung | 以累積式滾壓加工製作奈米或非晶質二元合金之研究 Study of binary nano-crystalline or amorphous alloy via accumulative roll-bonding |
2003 |
李敬仁 C.J. Lee | 鎂合金超塑變形之裂孔成核成長研究 Analysis on cavitation in AZ-series Mg alloys during superplastic deformation |
| 邱薰毅 S.Y. Chiu | 以累積滾壓及熔液噴旋法開發奈米或非晶質輕量Zr-cu基合金 Fabrication and characterization on nanocrystalline or amorphous Zr-Cu basic alloys made by accumulative roll-bonding and melt spinning |
|
| 吳信輝 H.H. Wu | 電子束或電弧銲接鎂合金之微織構與機性分析 Microtexture and mechanical properties of electron beam or tungsten inert gas arc welded Mg alloys |
|
| 蔡健民 C.M. Tsai | 以奈米粉體強化之高性能高分子PEEK製程與機械性質分析 Fabrication and mechanical properties analyses of the high performance polymers reinforced with nano-sized particles |
|
| 2004 | 洪子翔 T.H. Hung | 添加硼與矽對鋯鋁銅鎳非晶質合金結晶之熱性質研究 Study of thermal properties in Zr-Al-Cu-Ni amorphous alloy by adding boron and silicon |
| 張志溢 C.I. Chang | 摩擦旋轉攪拌製程對AZ31鎂合金晶粒細化之研究 Grain size refinement in AZ31 magnesium alloy by friction stir processing |
|
| 2005 | 鄭宇庭 Terry Y.T. Cheng | 添加硼對高功能鎂銅釔合金非晶質化及奈米結晶行為之影響 Amorphization and nanocrystallization behavior in Mg-Cu-Y alloy by adding boron |
| 莊家豪 C.H. Chuang | 摩擦旋轉攪拌對鎂基多元合金之混成與奈米細晶化研究 Study of nanocrystalline refinement for multi-component Mg-based alloys by friction stirring process |
|
| 林政信 C.S. Lin | AZ61鎂基合金與複材之製程與破壞韌性分析 Analysis of fracture toughness for AZ61 Mg based alloys and composites |
|
| 2006 | 賴炎暉 Y.H. Lai | 以表面改質之二氧化矽奈米粉體強化聚二醚酮基材 On the PEEK composites reinforced by surface-modified nano-silica |
| 陳海明 H.M. Chen | 鎂銅銀釓塊狀非晶質合金之玻璃形成能力及機械性質 Glass forming ability and mechanical properties of Mg-Cu-Ag-Gd bulk metallic glasses |
|
| 蔡育霖 Y.L. Tsai | 鎂鎳釔硼及鎂銅釹非晶質合金之玻璃形成能力與熱性質研究 Glass forming ability and thermal properties in Mg-Ni-Y-B and Mg-Cu-Nd amorphous alloys |
|
| 2007 | 周鴻昇 Stephen H.S. Chou | 利用磁控濺鍍合成鎂銅金屬薄膜及其特性分析 Preparation and characterization of Mg-Cu binary metallic thin film |
| 陳致榮 C.J. Chen | 鋯鈦與鋯銅非晶質薄膜之濺鍍製備與性質分析 Preparation and characterization of sputtered Zr-Ti and Zr-Cu thin film metallic glasses |
|
| 2008 | 湯振緯 Hannibal C.W. Tang | 金基塊狀非晶質合金機械性質與微成形能力之探討 Mechanical properties and micro-forming ability of Au-based bulk metallic glasses |
| 2010 | 孫碩陽 S.Y. Sun |
銀添加對二矽化鈦相變化及奈米壓痕跡機械行為的影響 Effect of additive Ag in TiSi2 thin films for phase transformation and mechanical behavior under nanoindentation. |
| 林逸志 I.C. Lin |
非晶與奈米晶多層膜系統之變形機制與剪切帶行為 (校內校外均不公開) Deformation mechanism and shear banding behavior in amorphous/nanocrystalline multilayer system. |
|
王顗任 Eden Y.R Wang |
鉬與鋯之奈米晶薄膜之晶粒成長與機械性質 Grain growth and mechanical properties of nanocrystalline Mo and Zr thin films. |
|
2011 |
陳柏佑 Leo B.Y. Chen | 金屬玻璃鍍膜對鎂合金表面之硬度改質 Surface hardness improvement in magnesium alloy by metallic-glass sputtered film. |
黃瀚生 Hanson H. S. Huang |
奈米與非晶多層薄膜於聚亞醯胺基板上之變形機制 Deformation Mechanism of Amorphous/nanocrystalline Multilayer Thin Films on Polyimide Substrates |
|
2012 |
胡婷婷 Tina T. T. Hu |
金屬玻璃鍍膜之光學與機械性質 Optical and Mechanical Properties of Thin Film Metallic Glasses Deposited on Aluminum Substrate |
林維昭 Barry W. C. Lin |
以去合金法製造多孔金屬玻璃之材料製備與特性分析 Fabrication and characterization of metallic glass foams by dealloying method |
|
2013 |
朱詠渝 Sunny Y. Y. Chu |
金屬玻璃薄膜濺鍍在316L不鏽鋼和玻璃上抗菌效果 Antimicrobial Effects of Thin Film Metallic Glasses Deposited on 316L Stainless Steel and Glass |
|
王武翰 Adga W. H. Wang |
不同的鍍膜條件和退火處理對於銀鎂鋁金屬玻璃膜的反射率改善
Reflectivity improvement of Ag-Mg-Al metallic glass films by different coating and annealing conditions |
|
2014 |
柯霽倫 Allen |
鈦基金屬玻璃薄膜在模擬體液下之生物電化學分析 Bio-ctrochemical response of Ti-based thin flim metallic glasses in simulated body fluid |
林彥達 Ben Y. D. Lin |
高反射與低電阻之銀銅鋁與銀鎂鋁結晶與非晶金屬薄膜研究 (論文開放下載的時間是 2016-09-04) AgCuAl and AgMgAl crystalline and amorphous metallic thin flim for high optical reflection and low electric resistivity applications |
|
吳子揚 Eric |
以化學去合金法從銀鋁合金製作奈米孔洞銀 (論文開放下載的時間是 2016-08-28) Microstructure and properties of nanoporous silver fabricated by chemical dealloying of Ag-Al alloys |
|
2015 |
於敬鈞 Andy |
以 Ag/ITO/Ag 結構製備高穿透的透明導電膜之研究 Research for fabricating high transmission transparent conductive thin film in Ag/ITO/Ag structure |
吳若涵 Amy |
微奈米尺度下鋁酸鋰單晶之機械行為 Mechanical behaviors of LiAlO2 single crystal in micro/nano scales |
|
楊季榮 Jarong |
金銀合金薄膜電阻式記憶體之製作及性能分析 Fabrication and characterization of Au-Ag alloy thin films resistance random access memory |
|
郭芝君 Z. J. Kuo Angel |
金屬玻璃薄膜濺鍍於光學玻璃上之抗菌以及抗黴菌效果 Antibacterial and Antifungal Effects of Thin Film Metallic Glasses Deposited on Optical Glass |
|
蔡守騏 Ricky |
鋁單晶之尺寸校應及塑性變形機制 The sample size effect and deformation mechanism of single crystal aluminum |
|
| 2016 | 陳怡潔 Ivy |
銀銅合金薄膜應用在電阻式記憶體之材料與電性研究 The study of material and electrical properties of Ag-Cu thin films applied in resistive random access memory |
陳亮宇 Bright |
3D列印積層製造Ti-6Al-4V合金之機械性質與在模擬體液下之電化學反應 Electrochemical response in SBF and mechanical properties of Ti-6Al-4V alloys made by 3D printing SLM additive manufacture |
|
劉晏初 Jeff |
以超臨界腐蝕去合金法製作銀鋁奈米孔洞結構 Nanoporous structure fabricated by dealloying AgAl thin film through supercritical fluid corrosion |
|
李柏逸 Billy |
以Ag/TCO/Ag多層膜製備高穿透透明導電薄膜之研究 Fabricating high transmission transparent conductive thin films in Ag/TCO/Ag multilayer films |
|
賴政中 Shine |
鉭基金屬玻璃於骨科植入之潛力評估與影響細胞貼附之因素探討 Evaluation of tantalum-based metallic glass potentials for bio-implant applications and their special cell attachment mechanism |
|
| 2017 | 蔡一誠 Ian |
超音波珠擊鍍膜研製高表面硬度1050鋁基複材之研究 Forming high hardness surface composite coating on1050 Al by ultrasonic mechanical coating and armouring |
許鄴峻 Frank |
以電化學沉積及超聲波機械鍍膜製作之羥磷灰石鍍層研究生物可降解鎂合金抗生物腐蝕之能力提升 Evaluation and investigation of bio-corrosion resistance enhancement for hydroxyapatite coating on biodegradable Mg alloy using electrodeposition and ultrasonic mechanical coating and armoring technique |
|
| 2018 | 葉翰庭 Ryan |
鈦鋁釩中輕量高熵合金之微奈米尺度潛變機制研究 Micro/nano-scaled creep mechanism of TiAlV medium/light weight high entropy alloy |
鍾岳峻 Jimmy |
電解拋光對積層製造製備鈦基材料的表面與機械性質影響 Effects of electropolishing treatment on surface roughness and mechanical properties of titanium-based materials fabricated by additive manufacturing |
|
周子修 Randy |
以晶粒細化研究 FeCoNiCrMnAl 高熵合金之超塑性 Evaluation of superplasticity-like behavior through grain refinement in FeCoNiCrMnAl high entropy alloy |
|
黃志豪 Chee |
雷射與電子束積層製造鈦合金經電解拋光後於骨科植入之性能評估 Performance evaluation for orthopedic application of electropolished titanium alloy fabricated by laser and electron beam additive manufactures |
|
| 2019 | 陳彥翔 |
生醫植入用鈦鉭鈮高熵合金薄膜之潛力評估與特性分析 |
| 2024 | 黃奕勛 |
硫化鎳奈米材料物理性質及光降解機理探討 |
| 2024 | 王浚宇 |
4H 碳化矽單晶於 (0001) 底面之奈米壓痕特性分析 |
| 2025 | 王元甫 |
4H單晶碳化矽 (11-20) 平面在奈米壓痕下之機械反應與缺陷分析 |
| 2025 | 梁沛宇 |
不同鉭比例鉭鈦鈮薄膜對抗生物腐蝕性質之影響 |
| 2025 | 蒲光沛 |
輕量多元Ti65(AlCr)23Nb12-XVX 合金之微組織與機性分析 |
| 2025 | 黃少郁 |
不同銀含量的鈦鋯銀薄膜對抗菌性質的影響 |
| 2025 | 張嘉哲 |
4H 碳化矽單晶於 (10-10) 稜柱面之微奈米壓痕硬度與破壞韌性分析 |
| 2025 | 紀傑瀚 |
鈦基多組分合金於不同面向之奈米壓痕特性分析 |