最新論文列表(PDF格式)載點 Overall publication list (in PDF) (觀看此表格建議安裝Adobe Reader 7.0以上之版本)
Download publication list-2020.07.27
(B) Conference Papers

(iii) Workshop Papers
Number Paper
1 J. C. Huang and A. J. Ardell, "Microstructure Characterization in Two Al-Li-Cu Alloys", Proc. 1st Annual Material Research Symposium, Materials Research Society and MSE Dept., UCLA, 1985, p. 13.
2 J. C. Huang and A. J. Ardell, "Microstructural Characterization of Quaternary Al-Li Base Alloys", Proc. 2nd ALCOA Al-Li Workshop, Hidden Valley, PA, 1985.
3 J. C. Huang and A. J. Ardell, "Strengthening Mechanisms due to T1 Precipitates in ?? Al-Li-Cu Alloys", Proc. 2nd Annual Material Research Symposium, Materials Research Society and MSE Dept., UCLA, 1986, p. 1.
4 J. C. Huang, "Deformation in Solid under Shock Wave Loading", International High-Pressure Research Workshop, Tainan, 1991, p. 12.
5 L. Wei and J. C. Huang, "Influence of Heat Treatment and Hot Working on the Fracture Toughness of Cast Aluminum Base Composites", Proc. Metal Matrix Composites Research Symposium, National Sci. Council and National Sun Yat-Sen Univ., Kaohsiung, 1992, p. 99.
6 T. D. Wang and J. C. Huang, "Analysis on High Strain Rate Superplasticity in 6061/1% Nano SiO2", Proc. Workshop between Mainland China and Taiwan on Ceramic and Metal Composites, Chinese Society for Materials Science, Taichung, 2001, p. 20.
7 J. C. Huang, "Recent Achievement in Developing Low Temperature and High Strain Rate Superplastic Materials", Workshop of 30th anniversary of Tsinghua University-a Joint Materials Workshop between Tsinghua University in Taiwan and Mainland China, Hsinchu, 2002, p. 106.
8 J. C. Huang, "Nanocrystalline and Amorphous Bulk Materials and Composites", Workshop of Nano Science and Technology, Kaohsiung, 2003, p. 28.
9 J. C. Huang, "Nanocrystallization and Amorphization Mechanisms in Zr-X Binary and Multiple Alloys during ARB", 2rd Workshop of Nano Science and Technology, Tainan, 2004, p. 45.
10 J. C. Huang, "Microstructural Evolution in Zr Based Amorphous Alloys", Workshop on Bulk Amorphous Metallic Alloys, Kaohsiung, 2004, p. 23.
11 J. C. Huang, "Nanocrystalline and amorphous Mg based alloys and composites", 5th Workshop of Nano Science and Technology, Tainan, 2005, p. 2.
12 Y. P. Hung, J.C. Huang, K. J. Wu, and Chi Y.A. Tsao, "Strengthening and Toughness of AZ61 Mg with Nano SiO2 Particles", 2nd Magnesium Workshop, Taipei, 2006, p. 13.
13 C. J. Lee and J. C. Huang, "High Strain Rate Superplasticity in Mg Based Composites Fabricated by Friction Stir Processing", 2nd Magnesium Workshop, Taipei, 2006, p. 79.
14 C. I. Chang, C. J. Lee, C. H. Chuang, J. C. Huang, and J. S. C. Jang, "On Mg-Al-Zn Intermetallic Alloys Made by Friction Stir Processing Containing Quasi-Crystals and Amorphous Phases", 2nd Magnesium Workshop, Taipei, 2006, p. 59.
15 T. H. Hung, Y. C. Chang, H. M. Chen, Y. L. Tsai, J. C. Huang, J. S. C. Jang, and T. G. Nieh, "Thermal and Mechanical Properties of Mg-Cu(Ni)-Gd(Y)-B(Si) Amorphous Alloys", 2nd Magnesium Workshop, Taipei, 2006, p. 35.
16 G. F. Chang, M. L. Kuo, R. H. Gong, Chi Y. A. Tsao, J. C. Huang, J. S. C. Jang, "Mg-Cu-Gd Layer Composites Plate Synthesized via Spray Forming Process", 2nd Magnesium Workshop, Taipei, 2006, p. 67.
17 R. H. Gong, M. L. Kuo, G. F. Chang, Chi Y. A. Tsao, J. C. Huang, J. S. C. Jang, "The Study of Mg-Cu-Y Bulk Metallic Glass Plate via Spray Forming Process", 2nd Magnesium Workshop, Taipei, 2006, p. 113.
18 J. S. C. Jang, L. J. Chang, B. C. Yang, Y. C. Huang, and J. C. Huang, "Crystallization and Thermal Properties of Mg65Cu25-xGd10Agx (x=0-10) Alloys", 2nd Magnesium Workshop, Taipei, 2006, p. 1.
19 J. C. Huang, "High Performance Mg Based Amorphous Alloys and Composites", Cross-Strait Mg Workshop, Kaohsiung, 2007, p. 7.
20 J. C. Huang, J. S. C. Jang, and C. Y. Tsao, "Recent Development in Mg Based Amorphous Alloys and Composites", Taiwan – Japan Magnesium Workshop, Taipei, 2007, p. 40.
21 J. C. Huang, J. S. C. Jang, and K. C. Hsieh, "Ductile Zr and Mg Based Metallic Glasses via Phase Separation and Reduced Size", 1st Bulk Metallic Glasses Workshop, National Taiwan University of Science and Technology, 2007, p. 29.
22 C. I. Chang, X. H. Du, and J. C. Huang, "Using FSP in Producing Ultrafine Nano Grains in AZ31 Mg Alloys", Annual Mg Workshop, Taipei, 2007, p. 10.
23 J. S. C. Jang, C. C. Tseng, L. J. Chang, J. C. Huang, and C. Y. Tsao, "Thermal Mechanical Properties of Mg58Cu31Nd5Y6 Bulk Metallic Glass within the Supercooled Liquid Temperature Region", Annual Mg Workshop, Taipei, 2007, p. 29
24 C. J. Lee, J. C. Huang, T. G. Nieh, and Y. H. Lai, "Sample Size Effect and Micro-compression of Mg65Cu25Gd10 Metallic Glass", Annual Mg Workshop, Taipei, 2007, p. 40.