Coordinated Measurement Machine
CMM
Direct Computer Control
Metromec TK2
Mechanical Probes
TP2 & Touch-trigger Probes
Measuring Table (Tolerance: 5μm).
Hardware Driver: Numerex CS100 (Size: 28×28×18).
System Software: U-Soft.
Probe Head: TP2 and Metromec TK2.
DCC controller.
Compressor: 2hp, 300ψ×1050mm, 303 (l/min).
Air Dryer.
X= 600㎜, Y= 600㎜, Z= 450㎜.
Work Range
Single-Axis:(3+L/300)μm.
Dynamic Tolerance:5μm.
Unilateral Tolerance:4μm.